Harley-Davidson® 10,000 Mile Maintenance
• Change engine oil & oil filter.
• Inspect air cleaner and service as required.
• Clean tappet oil screen. *
• Change primary chaincase lubricant and clean magnetic drain plug.
• Check clutch adjustment.
• Change transmission lubricant and clean magnetic drain plug.
• Check and adjust chains/belt.
• Grease the foot shift/brake lever bearings * and speedometer cable.
• Check rear brake pedal adjustment.
• Inspect brake pads and discs for wear.
• Check brake fluid reservoir levels and conditions.
• Inspect oil lines and brake system for leaks.
• Lubricate the following: front brake handlever, throttle control cables, clutch control cable and handlever.
• Check operation of throttle and enrichener controls.
• Inspect fuel valve, lines and fittings for leaks.
• Clean fuel tank filter screen.
• Check cruise control disengage switch & other components. *
• Check battery electrolyte level. Check and clean battery connections.
• Change spark plugs.
• Check tire pressure and inspect tread.
• Check wheel spoke tightness. *
• Repack wheel bearings with grease.
• Inspect, adjust and lube front fork bearing.
• Change front fork oil. *
• Repack rear fork bearings. *
• Inspect and adjust Springer rocker bearings. *
• Check condition of rear shock absorber.
• Check air suspension – pressure, operation and leakage. *
• Check stabilizer links * and engine mounts.
• Check tightness of all fasteners except engine head bolts.
• Check ignition timing and vacuum hose.
• Check engine low and fast idle speed adjustment.
• Road test.
*If applicable